Tool bags / Anbaco produces and distributes
- Material: High quality, non-stretch canvas
- Used to equip workers, electricians, .... to store tools and equipment in repair, installation, ......

Túi A / VN*
- Không chiếm quá nhiều không gian, Đặc biệt thích hợp cho văn phòng hoặc số lượng công nhân khoảng 25 người. 
- Đồ dùng gọn nhẹ đảm bảo chất lượng được sắp ngăn nắp, vệ sinh trong túi. 
- Túi sơ cứu dùng trong các trường hợp bị vấp té đau nhức tay chân nhẹ, trầy xước nhẹ, đứt tay, hoặc làm sạch các vết thương sơ bộ trước khi xử lý‎ các bước tiếp theo.
- Trang bị theo Thông tư số 19/2016/TT-BYT ngày 30 tháng 6 năm 2016 của Bộ trưởng Bộ Y tế ban hành về  Quy Định Về Túi Sơ Cứu Tại Nơi Làm Việc

448 / Anbaco - Vietnam
- Includes 4 alloy ground clamps
- The clamp head uses a wire clamp with a contact area of ​​50 ~ 300mm², the nose side can be made into a V shape up to 120⁰
- Ground wire made from 16mm² / 25mm² copper wire covered with 1mm PVC
- Set includes 1 piece of wire 1.5m long and 3 pieces 0.4m long connected by an insulated clamp (can be lengthened upon request)
- Used for grounding before performing work on 3-phase low voltage lines, Aptomat output at nuts and cables.
- Industrial design patent No. 21256 issued by the National Intellectual Property Office.

TD - 3351 / Anbaco
- Clamp head made of aluminum alloy
- The hot line clamp has a good spring and is tightened with a threaded ring. The contact surface between the clamp and the wire is large, good and even.
- The clamp head can clamp wires with a cross section of up to 240mm².
- There are 4 clamps for 01 set of ground wires.
- Grounding wire: Multi-strand soft copper wire with clear PVC coating; Uncoated wire cross section is 16mm²/25mm², PVC coating thickness is 1mm.
- There are 4 pieces of wire, each 2m long (or longer as required).
- At each end of the wire attached to the clamp head and the middle point connecting the wire segments, there must be a pressed coss. - At the pressed coss positions, there must be a flexible rubber cover on the outside to prevent the wire from fraying or breaking due to use. long time.
- Used to ground the medium voltage grid with voltage up to 35kV before performing work

GAM 220 / BOSCH
- Rod length: 40 cm
- Measuring range: 0 – 220°
- Angle measurement accuracy: ± 0.1°
- Water tube foam measurement accuracy: ± 0.05°
- Calculate angle accuracy: ± 0.1°
- Power supply: 4 1.5V LR6 (AA) batteries
- Approximate weight: 1.3 kg
- Automatic deactivation: 30 minutes
- Battery power: 80 hours

GIM 60 L / BOSCH
- Length: 60 cm
- Measuring range: 0 – 360° (4 x 90°)
- Electronic measurement accuracy 0°/90°: ± 0.05°
- Accurate electronic measurement at 1 – 89°: ± 0.1°
- Working range (laser): 30 m
- Approximate weight: 0.91 kg
- Laser type: 635 nm, < 1 mW
- Laser range: 30 m
- Laser level: 2
- Accurate laser height measurement: ± 0.5 mm/m
- Measurement units: °, %, mm/m
- Tripod thread: 1/4"

GIM 60 / BOSCH
- Length: 60 cm
- Measuring range: 0-360 degrees (4x90 degrees)
- Electronic measurement accuracy 0°/90°: ± 0.05°
- Accurate electronic measurement at 1 – 89°: ± 0.2°
- Measurement accuracy, glass tube foam: ± 0.057° = ± 1 mm/m
- Approximate weight: 0.77 kg
- Measurement units: °, %, mm/m
- Measure tilt accurately in degrees, percent or millimeters/meter
- Directional arrows and audio signals at 0° and 90° make adjustments easy
- The measured value can automatically rotate on the screen when operating in an area above the head

Vietnam
- Material: Red painted steel
- Height: 48~50cm
- Diameter: 55~60cm

LR 7 / BOSCH
- Weight: 150 g
- Working range: 5 - Bosch is used)
- Power supply: 2 1.5V LR6 (AA) batteries
- Protection level: IP 54
- Measurement accuracy, (fine/coarse): ± 1 mm/± 3 mm
- Transceiver type: Combination laser machine and standard laser line beam machine

LR 6 / BOSCH
- Weight: 120 g
- Working range: 5 - Bosch is used)
- Power supply: 2 1.5V LR03 (AAA) batteries
- Protection level: IP 54
- Measurement accuracy, (fine/coarse): ± 1 mm/± 3 mm
- Transceiver type: Combination laser machine and standard laser line beam machine

Thanh rào chắn / VN
- Chiều dài tối đa: 2.0m
- chiều dài thu gọn 1.2m

Xstep XT-380A
- Chiều cao tối đa: 3.8m
- Chiều cao rút gọn: 0.8m
- Số bậc: 13 bậc
- Khoảng cách bậc: 30.5cm
- Tải trọng: 150kg
- Trọng lượng: 12.65kg
- Độ dày nhôm: 1.45mm
- Tiêu chuẩn châu Âu: EN-131

TL-I-38B / China*
- Size: 88.5*48.5*8.8cm
- Maximum height: 3.8m
- Reduced height: 0.87m
- Number of steps: 13 steps
- Aluminum thickness: 1.3 - 1.5mm
- Weight: 11kg

M205New / AMECA - USA
- Material: T6063 aluminum alloy, powder coated
- Aluminum thickness: 1.5mm
- Number of steps: 4 steps * 4 sections
- Straightened height: 5.8m
- Height of letter A used: 2.9m
- Folded height: 1.52m
- Step distance: 28cm
- Weight: 16.5kg; Load capacity: 150kg
- Closed size: 152*35*26cm(L*W*H)
- Standard: EN131

AMC M205* / AMECA - USA
- Material: high quality aluminum alloy
- Number of steps: 5 steps * 4 sections
- Straightened height: 5.8m
- Height of letter A used: 2.9m
- Step distance: 28cm
- Weight: 14.5kg; Load capacity: 150kg
- Closed size: 152*35*26cm(L*W*H)

Thang dây/m/ VN*
- Chất liệu: 2 cạnh bằng sợi polyester tổng hợp
- Nấc thang bằng thép không gỉ
- 2 đầu có gắn 2 móc thép lớn để móc vào vật cố định
- Chiều dài theo yêu cầu khách hàng
- Các chiều dài có sẵn: 5m, 10m, 15m, 20m, 30m, 40m, 45m
- Chịu tải: > 250kg
- Trục 2 cạnh thử tải 3000kg, nấc thang thử tải 300kg

TCD3KV-0.65x1 / Vicadi - Vietnam*
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 0.65m x 1m x 5mm thick
- Voltage used: 3,000V AC
- Test voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card

TCD3KV-1x1 / Vicadi - Vietnam*
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 1m x 1m x 5mm thick
- Voltage used: 3,000V AC
- Test voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card

TCD35KV-1x1 / Vicadi - Vietnam
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 1m x 1m x 8mm thick
- Voltage used: 35,000V AC
- Test voltage: 35,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card