MFLZ8 / China
- Material: ABC dry powder, pressure compression
- Steel tank shell, with pressure gauge
- Used to extinguish fires of solid, liquid, gas and electrical equipment with electrical capacity up to 380V
- Weight of powder in jar: 8kg
- Working temperature: from -20ºC to 50ºC

Adela A.4M Safety Lanyard
- Origin: ADELA - Taiwan
- 4 meters long, 14mm diameter
- Two swivel hooks H-6701 + one sliding hook H-6707 + figure-8 ring

3288 / HIOKI - Japan
- Measure current DC100.0/ 1000 A
- Measure AC current: 100.0/ 1000 A
- Measure DC voltage: 419.9 mV to 600 V, 5 scales
- AC voltage measurement: 419.9 mV to 600 V, 4 scales
- Resistance measurement: 419.9 Ω to 41.99 MΩ, 6 scales
- Check continuity: resistance ≤ (50 Ω ±40 Ω)
- Wire clamp diameter: φ 35 mm

CM4375-50 / HIOKI - Japan
- DC current measurement range: 1000 A, (maximum display 999.9 A
- AC current range: 1000 A (Maximum display 999.9 A
- DC + AC current range: 1000 A
- DC capacity: 0.0 VA to 1000 kVA
- DC voltage range: 600.0 mV to 1000 V, 5 measuring ranges
- AC voltage range: 6,000 V to 1000 V, 5 measuring ranges
- DC + AC voltage range: 6,000 V to 1000 V, 5 measuring ranges
- Impedance range: 600.0 Ω to 6,000 MΩ, 5 measuring ranges
- Electrostatic capacity range: 1,000 μF to 1000 μF, 4 measuring ranges
- Frequency range: 9.999 Hz to 999.9 Hz, 3 measurement ranges
- Mount core diameter: φ34 mm (1.34 in)

3244-60 / HIOKI - Japan
- DC voltage measurement: 419.9 mV to 500 V; 5 measuring scales
- AC voltage measurement: 4.199 V to 500 V; 4 measuring scales
- Resistance measurement: 419.9 Ω to 41.99 MΩ; 6 measuring scales
- Check continuity: 50 Ω ± 40 Ω

CM4371-50 / HIOKI - Japan
- DC current measurement range: 20.00 A/600.0 A
- AC current range: 20.00 A/600.0 A
- DC/AC current range: 20.00A/ 600.0A
- DC voltage range: 600.0 mV to 1000 V, 5 scales
- AC voltage range: 6,000 V to 1000 V, 4 scales
- DC/AC voltage range: 6,000 V to 1000 V, 4 scales
- Resistance measurement: 600.0 Ω to 600.0 kΩ, 4 scales
- Capacitance measurement: 1,000 μF to 1000 μF, 4 scales
- Frequency range: 9,999 Hz to 999.9 Hz
- Check continuity:  [ON] 25Ω±10 Ω, [OFF] 245Ω±10 Ω
- Check diode: Open voltage ≤ DC2.0V, short circuit current: 200 μA.
- Temperature measurement:  -40.0 to 400.0 ˚C
- Clamp fork tight diameter: φ33 mm
- DC power measurement: 0.0 kVA to 600 kVA (up to 1200kA when used with Hioki P2000)

DT4282 / HIOKI - Japan
- DC voltage measurement feature: 60 mV to 1000 V, 6 scales
- AC voltage measurement feature: 60 mV to 1000 V, 6 scales
- DC / AC voltage measurement mode: 6V to 1000 V, 4 scales
- DC current measurement feature: 600 μA to 10 A, 6 scales
- AC current measurement feature: 600 μA to 10 A, 6 scales
- Resistance measurement feature: 60 Ω to 600 MΩ, 8 scales
- Capacitance measurement feature: 1 nF to 100 mF, 9 ranges
- Check continuity: 20/50/100/500 Ω
- Diode test:  Open terminal voltage: ≤4.5 V, Test current: ≤1.2 mA

FT6380-50 / Hioki - Japan
- Ground resistance range: 0.20 Ω to 1600 Ω, 10 ranges
- AC current range: 20.00 mA to 60.0 A 5 ranges
- Current measurement: 100 A AC continuous, 200 A AC for 2 minutes or less
- Maximum rated ground voltage: 600 VAC
- Maximum measurable wire diameter: φ 32 mm (1.26 in)

FT6031-50 / Hioki - Japan
- Measuring system: 2-pole method/ 3-pole method (switchable)
- Accuracy:
±1.5% rdg ±8 dgt
±1.5% rdg ±4 dgt
±1.5% rdg ±4 dgt
- Earth voltage: Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60 Hz)
±1.3% rdg ±4 dgt (DC)
- Allowable ground potential: 25.0 V rms (DC or sine wave)

IR3455 / Hioki - Japan
-  Test voltage: 250 V to 5.00 kV DC
- Voltage measurement:
0.00 MΩ to 500 GΩ (250 V)
0.00 MΩ to 1.00 TΩ (500 V)
0.00 MΩ to 2.00 TΩ (1 kV)
0.00 MΩ to 5.00 TΩ (2.5 kV)
0.00 MΩ to 10.0 TΩ (5 kV)
- Current measurement: 1 mA
- Resistance range: 10 MΩ to 10 TΩ, 7 scales
- Leakage measurement: 1.00 nA to 1.20 mA, 6 scales
- Voltage measurement: ±50 V to ±1.00 kV DC, 50 V to 750 V AC

IR4053-10 / Hioki - Japan
- Output measurement voltage: 50/125/250/500/1000 VDC. In which the 500/1000 VDC ranges can be used for solar power systems.
- Maximum resistance measurement value: 100/250/500/2000/4000 MΩ
- Lower limit resistance value: 0.05/0.125/0.25/0.5/1 MΩ
- Measure DC voltage: 4.2V to 1000V, 4 scales
- Measure AC voltage: 420V / 600V, 2 scales

IR4056-21 / Hioki - Japan
- Output measurement voltage: 50/125/250/500/1000 VDC
- Maximum resistance measurement value: 100/250/500/2000/4000 MΩ
- Lower limit resistance value: 0.05/0.125/0.25/0.5/1 MΩ
- Overload protection: AC 600V (10s) for scales < 1000 VDC and AC 1200V (10s) for scales 1000 VDC
- DC voltage measurement feature: 4.2V to 600V, 4 scales
- AC 50/60 Hz voltage measurement feature: 420V / 600V, 2 scales
- Ground wire continuity test feature: 10 Ω to 1000 Ω, 3 scales

PD3129 / Hioki - Japan
- Voltage range: 3-phase 70 to 600V AC
- Clamp head diameter: 2.4mm to 17mm
- Positive phase detection: 4 LEDs light up clockwise and the speaker beeps intermittently
- Negative phase detection: 4 LEDs light up counterclockwise and the speaker sounds continuously

PD3129-10 / Hioki - Japan
- Voltage range: 3-phase 70 to 1000V AC
- Clamp head diameter: 7mm to 40mm
- Positive phase detection: 4 LEDs light up clockwise and the speaker beeps intermittently
- Negative phase detection: 4 LEDs light up counter-clockwise and the speaker sounds continuously

8031F / Kyoritsu - Nhật Bản

- Điện áp hoạt động: 110 - 600V AC
- Cầu chì: 0.5A/600V (F)
- Thời hạn liên tục: >500V : Trong 5 Phút
- Tần số đáp ứng: 50Hz/60Hz
- Tiêu chuẩn áp dụng: IEC 61010-1 CAT III 600V Pollution Degree 2
- Điện áp chịu được: 5550V AC Trong 1 phút
- Kích thước: 106(L) × 75(W) × 40(D)mm
- Trọng lượng: 350g
- Dây: 1.5m
- Phụ kiện: Hộp đựng và hướng dẫn sử dụng

8125 / Kyoritsu - Japan
- Diameter of pliers: Ø40mm
- Current measuring range: AC 500A
- Output voltage: AC 500mV/500A
- Phase shift: ±1.0º
- Output impedance: 2Ω
- Optional accessories: Jack 7146; Extension cord 7185

8128 / Kyoritsu - Japan
- Diameter of pliers: Ø24mm
- Current measuring range: AC 5A (Max.50A)
- Output voltage: AC 50mV/5A
- Phase shift: ±2.0º (45 – 65Hz)
- Output impedance: About 20Ω
- Optional accessories: Jack 7146; Extension cord 7185

2060BT / Kyoritsu - Japan
- Wiring type: 1 Phase 2 Wire, 1 Phase 3 Wire, 3 Phase 3 wire, 3 Phase 4 Wire
- Measurements and parameters: Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor Phase angle, Harmonics, Phase sequence
- AC voltage: 1000 V
- Peak factor: 3 or less at current range 40A/400A
3 or less 1500A at 1000A current range
- Frequency: 40.0 – 999.9Hz
- Operating capacity: 40.00/400.0/1000kW
- Reactive power: 40.00/400.0/1000kVA
- Apparent capacity: 40.00/400.0/1000kVar
- Power factor (cosØ):  -1.000 – 0.000 – +1.000.
- Phase angle (For 1 Phase 2 Wire connection):  -180.0 – 0.0 – +179.9.
- Total harmonics THD-R/THD-F:  0.0% – 100.0%
- Phase order: ACV 80 – 1100V
- Clamp diameter: φ75 mm

2062BT / Kyoritsu - Japan
- Wiring type: 1 Phase 2 Wire, 1 Phase 3 Wire, 3 Phase 3 wire, 3 Phase 4 Wire
- Measurements and parameters: Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor, Phase angle, Harmonics, Phase order
- AC voltage: 1000 V
- Peak factor: 1.7 or lower
- AC current: 40/400/1000 A (3 automatic measurement ranges)
- Peak factor: 3 or less at current range 40A/400A
3 or less 1500A at 1000A current range
- Frequency: 40.0 – 999.9Hz
- Operating capacity: 40.00/400.0/1000kW
- Reactive power: 40.00/400.0/1000kVA
- Apparent capacity: 40.00/400.0/1000kVar
- Power factor (cosØ):  -1.000 – 0.000 – +1.000.
- Phase angle (For 1 Phase 2 Wire connection):  -180.0 – 0.0 – +179.9.
- Total harmonics THD-R/THD-F:  0.0% – 100.0%
- Phase order: ACV 80 – 1100V (45 – 65Hz)
- Clamp diameter: φ55mm max