.
.
.
.
Full body harness kit COV A1+2S/T + hanging rope with 2 steel hooks
A1+ 2S/T/COV - (Korea)*
- A1 full-body harness made of high-strength polyester material + 2 25mmx2mm woven hanging straps.
- Full body strap around the shoulders and thighs made of synthetic fiber 4.25 cm wide and 1.5 mm thick, with colored edges on both sides. The thigh strap is adjustable in length and easy to remove.
- Each shoulder has a 7.5 cm x 17 cm pad that can be removed and cleaned.
- Chest strap: made of synthetic fiber in plate form with easily removable latch.
- 3-layer padding behind the D-lock helps position the strap and creates a comfortable feeling when wearing.
- D-ring on the back:  Made of steel, 5mm round, high quality plated.
- 2 Y-shaped shock absorbing straps including 2 large steel hooks (50 mm opening mouth with 2-level safety latch) - 1 shock-absorbing tape - 1 D-shaped lock with removable mouth, 2-level safety latch.
0 ₫ 0.0 VND
Adela H-117 Safety Harness Set for electricians
H117 / ADELA (Taiwan)*
- There are 4 "D" rings so H-117 allows use in cases where additional head straps are used.
- Soft back cushion, 105 mm wide with hanging hooks and a convenient tool bag when working at height.
- Hanging rope (pole sling) flat plate φ40mm length 2m
- The hanging rope has 2 swivel hooks, and 1 buckle to adjust the rope length
- The sling is protected by a leather tube
- EN 354 - EN361 - EN362 standards
- Weight: 2.5kg
0 ₫ 0.0 VND
Korean construction seat belt set with shock absorber BR-1010
BR1010 / Korea
- 18mm hanging cord up to 1.8m long.
- Suspension rope has shock absorbers. At the end of the hanging rope is a large hook.
- Static strength >15kN
- Origin: SSTOP Korea - imported by Anbaco.
0 ₫ 0.0 VND
KUKJE K131 half-body safety set + S/T safety lanyard (set)
K131 / Kukje (Korea)*
- Material: polyester, steel hook
- Includes 40mm body strap and 50mm waist strap with back padding and size adjustment buckle.
- Hanging rope ϕ12mm 1.5m long with large steel hook attached
- Hanging strap connected to shock absorbing tape and steel hook
- The chest strap has a clasp that can be easily removed or installed.
- The belly band has a special structure, very sturdy, easy to disassemble or install.
- Includes tool bag
- Weight: 1.6 kg/set
- Standard: KOSHA Korea, EN
0 ₫ 0.0 VND
Chemical protection kit 4570 (gray)
4570 / 3M
- Chất liệu vải dày với lớp bên trong được xử lý chống tĩnh điện mềm mang đến sự bảo vệ và tiện lợi
- Bộ đồ giúp bảo vệ chống lại bụi bẩn nguy hiểm (Loại 5), văng chất lỏng nhẹ (Loại 6), thuốc xịt chất lỏng áp suất thấp (Loại 4) và vòi phun chất lỏng áp suất cao (Loại 3)
- Đường may được dán kín bằng băng bảo vệ hóa học 5 lớp
0 ₫ 0.0 VND
Sekur SCBA 9.0liter composite carbon air supply unit
Sekur Type 2 BA 9.0L / Sekur (Italy)
- Breathing time: ~80 minutes
- Gas capacity: 9.0 liters
- Air volume: ~2700 liters
- Pressure: 300 bar
- Storage temperature: -20ºC to 65ºC
- Empty bottle weight: 3.8kg
- Weight of whole set + gas: <12 kg
- According to EU, EN, CE standards, 100% new
0 ₫ 0.0 VND
Sekur SCBA 6.8 liter composite carbon air supply unit
Sekur Type 2 BA / Sekur (Italy)
- Breathing time: ~60 minutes
- Gas capacity: 6.8 liters
- Air volume: 2040 liters
- Pressure: 300 bar
- Working temperature: -20ºC to 65ºC
- Weight of the whole set (empty bottle): 12kg
- Weight of whole set + gas: 18 kg
- Average lifespan of equipment: at least 10 years
- According to EU, EN, CE standards, 100% new
0 ₫ 0.0 VND
Half body harness kit COV 1 aluminum hook
COV (Korea)
- Material: high strength polyester fiber
- Reflective neon green yellow color, easy to recognize
- The aluminum alloy D-hook is lighter and has a plastic washer inside to reduce the possibility of wire breakage due to contact.
- 25mmx2mm hanging rope made from high-strength polyester, with shock absorber, using 1 large aluminum hook.
- Standard: KOSHA Korea, EN
0 ₫ 0.0 VND
Dolphin A9 raincoat set
Dolphin high-quality rainwear (no box)
- Thickness: 0.22 - 0.23
- Material: Taiwanese nylon fabric coated with PVC
- Uses: Wear in the rain and protect against cold
- Made in Viet Nam
0 ₫ 0.0 VND
RB-2 RANDO 2-zip raincoat set
High quality rainwear RB-2 RANDO*
- The pants and shirt set has 2 uses: Keep warm - protect from the rain
- 2-layer fabric design helps keep warm and protect against cold
- Fabric thickness: 0.22 mm
- Material: High quality 2-layer Nylon/PVC, non-stretch, non-wet, digital sewing technology, water pressure testing process of more than 4,000 AMPH/cm2
- Suitable for both men and women
- Size L (<1m60); XL (1m60–1m65); XXL (1m66–1m73); 3XL (>1m73)
0 ₫ 0.0 VND
Dolphin A8 2-zip raincoat set
Dolphin premium rainwear*
- Thickness: 0.22 - 0.23
- Material: Taiwanese nylon fabric coated with PVC
- Uses: Wear in the rain and protect against cold
- Made in Viet Nam
0 ₫ 0.0 VND
Adela HC-667, A.3M set with 2 swivel hooks
HC667.A3M / ADELA (Taiwan)
- Available in 45mm wide and 1.2 meter long versions.
- Because it has 2 four-sided rings and 4 "D" rings, HC-667 allows use in cases where additional slings are used.
- Soft back cushion, 105 mm wide with hanging hooks and a convenient tool bag when working at height.
- Hanging rope (pillar sling): Round hanging rope ø14mm, 3 meters long; The hanging rope has 2 small hooks, 1 self-locking slide lock and 1 number 8 steel ring.
- When using your hand to squeeze the self-locking lock, you can move the lock along the length of the hanging rope to the required position.
- The sling is protected by a flexible plastic tube
- EN 354 - EN361 - EN362 standards
0 ₫ 0.0 VND
Set of 9 INGCO concrete drill bits - AKDL30901
AKDL30901/Ingco
- SDS Plus 9-piece hammer drill bit set
- Size: 5X110mm, 6X110mm, 8X110mm, 8X160mm, 10X160mm, 12X160mm, 14X160mm, 16X160mm
- Weight: 1kg
0 ₫ 0.0 VND
Set of 8 INGCO Double-Round Wrench - HKSPA3088
HKSPA3088/INGCO
- Type of wrench with 2 round ends (ring). Specialized for turning nuts, bolts...
- Material: made from chrome steel alloy, highly durable, resistant to wear and rust over time
- Size: 6x7mm, 8x9mm, 10x11mm, 12x13mm, 14x15mm, 16x17mm, 18x19mm, 20x22mm
- Weight: 1kg.
0 ₫ 0.0 VND
Set of 8 INGCO Double Head Wrench - HKSPA2088
HKSPA2088/INGCO
- Material: made from chrome steel alloy so it is highly durable, does not corrode and rust over time
- Wrench type with 2 open mouth ends. Specialized for turning nuts, bolts...
- Includes 8 trees with sizes: 6x7mm, 8x9mm, 10x11mm, 12x13mm, 14x15mm, 16x17mm, 18x19mm, 20x22mm
- Weight: 1 kg.
0 ₫ 0.0 VND
Set of 7 Screwdriver Magnetic Screwdrivers INGCO - HKSD0728
HKSD0728/INGCO
- 7-piece screwdriver set with magnets to hold screws, super convenient
- Newly designed handle in 2 colors, black and yellow. There is a rubber coating designed to enhance grip when used, even in water or oil environments.
- Material: High quality CR-V should be highly durable, not subject to wear and rust over time
- Include:
1pc SL3.0*3*75
1pc SL4.0*4*100
1pc SL5.5*5*100
1pc SL6.5*6*125
1pc PH0*3*75
1pc PH1*5*75
1pc PH2*6*100
0 ₫ 0.0 VND
Set of 6 INGCO Insulated Screwdrivers - HKISD0608
HKISD0608/INGCO
- Material: Chrome vanadium steel. Made from high quality alloy, sturdy, highly durable and good bearing capacity. Does not corrode or rust over time.
- Specification:
+ 3 flat screws: 3x75mm - 4x100mm - 5x150mm3 and 3 bake screws: PH0x60 - PH1x80 - PH2x100
- Insulated circular tube 1000 V, 24/T
- Weight: 0.3kg
- Highly applicable in many industries such as mechanics, factories, construction, electricity, repair, manufacturing, machinery warranty...
0 ₫ 0.0 VND
Set of 6 INGCO Magnetic Welding Angle Measures - AMWH6001
AMWH6001/INGCO
- Set of 6 magnetic angle rulers (45°, 90°, 135°)
- Size: 3x 2 pcs
- Suction force:
+ 2 large corner keels 25 Lbs ~ 12 kg
+ 4 small corner keels 10 Lbs ~ 4 kg
- Material: Magnet and steel
- Weight: 2kg
0 ₫ 0.0 VND