- A handheld device that assists users in the process of visually inspecting abrasions, cuts, tears or punctures on insulating gloves
- Glove inflator set includes: Test pump, a carrying bag, and a strap to hold the gloves in place during testing
- Total weight: Approx. 0.9kg
- Recommendation: you should use a pump to check insulating rubber gloves before using them in contact with electricity, to ensure safety and avoid the gloves being exposed, punctured, eroded, etc., causing leaks. Dangerous electricity.

AFG100/ SALISBURY - USA
- Anti-electric arc
- Made from super soft premium mixed materials, creating a comfortable feeling when used
- Has high mechanical durability, used in environments involving electric arcs and explosion-proof
- Electric arc protection value 100Cal/cm2
- Material: TuffWeld® (60% Lenzing FRTM. 40% Kevlar®) and surface with Q/9® layer
- Sewing with Nomex thread
- Khaki color
- Length 36cm
- Meets CEI 903-2002, EN 60 903-2003 standards

567-10 / Hasting - Mỹ
Hastings 567-10 Universal Switch Stick 10′ Length 1.25” Diameter
Hastings 567-10 – This 1.25″ diameter, 10’ length universal Spline electrical Hot Stick was designed for use as a hot stick handle and can adapt with any universal tool. This electrical hot stick is made of Epoxiglas® and lightweight aluminum castings.
Tested per ASTMF-71 and OSHA

3904CL / SEW - Taiwan
+ ACA: 400.0/2000A /±(1.5%rdg+4dgt)
+ ACV: 400.0mV,4,000/40.00/400.0/750V /±(1.0%rdg+3dgt)
+ DCA: 400.0/2000A /±(1.5%rdg+4dgt)
+ DCV: 00.0mV/4,000/40.00/400.0/1000V /±(0.75%rdg+2dgt)
+ Ω continuity test: 400.0Ω/4.000/40.00/400.0kΩ/4.000MΩ / ±(1.5%rdg+3dgt) 40.00MΩ ±(2.0%rdg+4dgt)
+ C: 2.000/20.00/200.0nF/20.00/200.0uF/2.000mF ±(3.0%rdg+5dgt)
+ Hz: 4.000/40.00/400.0kHz/4.000/40.00MHz/ ±(1.0%rdg+2dgt)
- Plier ring: 55mm Max.
- Dimensions: 265(L) × 100(W) × 42(D)mm
- Weight: 510g
- Power source: 9V(6F22) × 1

JHSR-383 (JTTB-3.8/3) / China
- Material: fiberglass (glass fiber)
- 3-piece retractable cage type
- Maximum length: 3.8m
- Voltage 35,000 V AC
- Comes with a steel operating pole head

JHSR-504 (JTTB-5M/4) / China
- Material: fiberglass (glass fiber)
- 4-piece retractable cage type
- Maximum length: 5.0m
- Voltage 110,000 V AC
- Comes with a steel operating pole head

JHSR604 (JTTB-6M/4) / China
- Material: fiberglass (glass fiber)
- 4-piece retractable cage type
- Maximum length: 6.0m
- Voltage 220,000 V AC
- Comes with a steel operating pole head

JTDX-110KV / Jiatai
- 3 floor bars 2 meters long, pipe diameter 3cm, super light Epoxy plastic, good insulation and heat resistance.
- Cable set includes 3 2 meter long cables connected to 1 12 meter cable. The ground wire is made from copper wire with a cross section of 35 mm²
- 1 grounding nail with diameter 1.6 cm, width 13.5 cm, length 81 cm
- 1 Hook is light cast aluminum alloy compression
Used for grounding before performing work on power lines, ensuring safety for workers.

BMTS4/6 / Sofamel - Spain
- Length when collapsed: 1.7 meters
- Maximum extended length: 5.97 meters
- Use indoors and outdoors.
- Weight: 3.40 Kg
- Made of reinforced fiberglass, the pole's head is toothed
- The telescoping pole has a special stepless adjustment mechanism with durable locking latch, light and very fast operation compared to other types of poles.

BMTS5/9 / Sofamel - Spain
- Length when collapsed: 2 meters
- Maximum extension length: 8.75 meters (5 sections)
- Use indoors and outdoors.
- Weight: 5.2 Kg
- Made of reinforced fiberglass, the pole's head is toothed
- The telescoping pole has a special stepless adjustment mechanism with durable locking latch, light and very fast operation compared to other types of poles.

SP-321 / Sofamel - Spain
- Material: rubber
- Size: size 19
- Length: 1m / 1.5m
- Used as temporary insulation for bare conductors at low voltages.

SP-39 / Sofamel - Spain
- Wooden clamp 120 mm long used to fix the vinyl cloth on the electrical wire