276HD / SEW - Taiwan
- Working voltage
+ High voltage: 3kV ~ 24kV AC
+ Low voltage: 80 ~ 600V AC
- Frequency: 50/60Hz
- Retracted length: 354+30mm
- Length when pulled out: 1010±30mm
- Warning LED flashes and Buzzer sounds (50dB)
- Detect voltage: 80V-24kV.
- Working temperature: -10˚ C ~ +50˚C
- Weight: 180g
- Power: LR44 battery (1.5V)
- Standard: EN61010-1 EN50081-1 EN55082-1En55022 EN61000-4-2 EN61000-4-3

300HP (275-KV02) / SEW - Taiwan
- Test voltage range: OFF--TEST--240V--3.3kV--6.6kV--11kV--22kV--33kV--66kV--132kV--275kV
- The maximum detection range can be 500kV
- LED warning and audible siren
- At 240VAC detection distance: 5 ~ 10cm
- Operating temperature: -10°C~50°C
- Protection level: IP66.
- 3 LEDs in a circle for easier viewing in any direction (360° LED indicator).
- Power source: 3 x 1.5V "C"
- Weight: 590g
- Dimensions: 265x117mm

300HP (275-KV01) / SEW - Taiwan
- Test voltage range: OFF--TEST--240V--2kV--6kV--11kV--22kV--33kV--132kV--275kV
- The maximum detection range can be 500kV
- LED warning and audible siren
- At 240VAC detection distance: 5 ~ 10cm
- Operating temperature: -10°C~50°C
- Protection level: IP66.
- 3 LEDs in a circle for easier viewing in any direction (360° LED indicator).
- Power source: 3 x 1.5V "C"
- Weight: 590g
- Dimensions: 265x117mm

275HP-500KV / SEW - Taiwan
- Test voltage range: 240V, 3.3kV, 11kV, 22kV, 33kV, 66kV, 110kV, 220kV, 330kV, 500kV
- LED and sound warnings
- Operating temperature: -10ºC~50ºC
- At 240VAC detection distance: 5~10cm
- Power source: 3 x 1.5V "C"
- Weight: 600g

275HP / SEW - Taiwan
- Test voltage range: 240VAC, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV
- LED display and audible buzzer
- Operating temperature: -15°C~55°C
- At 240VAC detection distance: 5 ~ 10cm
- Power source: 3 x 1.5V "C"
- Weight: Approx. 550g (including battery)
- Suitable for all types of poles. For both indoor and outdoor use

LVD-18 / SEW - Taiwan
- Direct contact voltage detection: 50V~600Vac
- Non-contact voltage detection: 50V~600Vac
- Frequency: 50~500Hz
- Measurement type: CAT III 600V
- LED and audio alerts when voltage is detected
- Humidity: < 80% R.H.
- Altitude: max 2000m
- Power: 1.5V (AAA) × 2
- Dimensions: 165 (L) x 27 (W) x 22 (D) mm
- Weight including battery: 46g

277HP / SEW - Taiwan
- High voltage tester with two optional measuring ranges: Low: 50V~1.5kV; High: 1.5kV~132kV
- Electric used:
+ Off state: <5uA
+ Low voltage detection mode: <40mA
+ High voltage detection mode: <40mA
- Mode switching button: HIGH/OFF/LOW
- Operating temperature: 0ºC~40ºC
- Dimensions: 318 x 75 x 71 mm
- Weight: 227g
- Self-test function: press the "Test" button to check that the device is working properly before using it to check high voltage.
- Protection standard: EN61326-1; EN61000-4-2; EN61000-4-3

273HP / SEW - Taiwan
- High voltage tester with two optional measuring ranges: Low: 50V~1.5kV; High: 1.5kV~132kV
- Electric used:
+ Off state: 0uA
+ Low voltage detection mode: <20mA
+ High voltage detection mode: <20mA
- Mode switching button: HIGH/OFF/LOW
- There is a glowing LED light and an alarm sound when voltage is detected
- Operating temperature: 0ºC~50ºC
- Dimensions: 245 x 80 x 37 mm
- Weight: 175g
- Power supply: 9V (6LF22) x 1 Alkaline battery
- Must use a working pole when testing high voltage 1.5kV ~ 132kV
- Safety standards: EN 61326-1, EN 61000-4-2, EN 61000-4-3

3280-10F / HIOKI - Japan
- AC current: 0-1000 A, 3 scales. Can measure up to 4200A when used with the Hioki CT6280 extension ring
- DC voltage: 0-600 V, 5 scales
- AC voltage: 0-600 V, 4 scales
- Resistance: 0-42.00 MΩ, 6 scales
- Continuous circuit: buzzer at threshold ≤ (50 Ω ± 40 Ω)
- Wire clamp diameter: φ 33 mm
- Dimensions: (WxHxD) 57x175x16 mm
- Weight: 100g

Bộ Coveral / Việt Nam
- Chất liệu: vải không dệt
- Bảo vệ toàn thân trong môi trường ô nhiễm bụi, chất lỏng, vi khuẩn
- Dây kéo dài phía trước, có thun bo tay, thun bo chân
- Màu: Trắng

Bộ vải Si may túi hôp/ VN
- Chất liệu: Vải si
- Màu sắc: đa dạng
- Nhận may theo mẫu

Bộ vải Si may thường / VN
- Chất liệu: Vải si
- Màu sắc: đa dạng
- Nhận may theo mẫu

Bộ vải Si may kỹ / VN
- Chất liệu: Vải si
- Màu sắc: đa dạng
- Nhận may theo mẫu

Bộ vải Si may thường/ VN
- Chất liệu: Vải si
- Màu sắc: đa dạng
- Nhận may theo mẫu

Product set includes:
- HP333D 12Vmax CXT Li-Ion Screwdriver Hammer Drill 10 mm (3/8 “) 28 Nm (250 in.lbs.)
- JV101D top handle type JV101D 12V CXT Li-Ion circular saw
- 2 Batteries 12Vmax 1.5 Ah, 1 fast charger
- 1 MAKITA bag
- Comes with 3 drill bits and 3 miter saw blades

Product set includes:
- HP333D 12Vmax CXT Li-Ion Screwdriver Hammer Drill 10 mm (3/8 “) 28Nm (250 in.lbs.)
- TD110D 12V CXT Li-Ion Screwdriver  110 N · m (970 in.lbs.)
- 2 Batteries 12V 1.5 Ah, 1 fast charger
- 1 MAKITA handbag

Product set includes:
- DF333D 12Vmax CXT Li-Ion Screwdriver Drill 10 mm (3/8″) 28 N m (250 in.lbs.)
- TM30D 12Vmax CXT Li-Ion multifunction machine
- 2 Batteries 12Vmax 1.5 Ah, 1 fast charger
- 1 MAKITA bag

Product set includes:
- TD110D 12V CXT Li-Ion Screwdriver, 110 Nm (970 in.lbs.)
- DF333D 12Vmax CXT Li-Ion Screwdriver Drill  10 mm (3/8″), 28 Nm (250 in.lbs.)
- 2 Batteries 12V 1.5 Ah, 1 charger
- 1 MAKITA handbag

Product set includes:
- DF332D Brushless Drill 12Vmax CXT BL 10 mm (3/8 “) 32 Nm (280 in.lbs.)
- Brushless TD111D screwdriver with Mode A (Assist Mode) 135 Nm (1,200 in.lbs.)
- 2 Batteries 12Vmax 1.5 Ah, 1 fast charger
- 1 MAKITA aluminum container

Product set includes:
- HP332D Brushless Hammer Drill 12V CXT BL 10 mm (3/8″) 32 Nm (280 in.lbs.)
- Brushless TD111D screwdriver with Mode A (Assist Mode) 135 Nm (1,200 in.lbs.)
- 2 batteries 12V max 1.5 Ah, 1 fast charger
- 1 MAKITA aluminum container