BXQ-Z-40B / Juli
- Weight: 0.9 kg
- Size: 275x95x60mm
- Stripping range: 14-40mm
- Peeling thickness: less than 6mm but for the terminal in the middle 4mm
- Peeling thickness can be adjusted, used for conductors, cable ends and middle peelings

HYCP-2612 / Kudos
- Pressure: 700 bar
- Required oil: 118.4 cc
- Pressing force: 12.7 tons / 125 kN
- Mouth width: 26 mm
- Length: 490 mm
- Weight: 6.7 kg
- Wire diameter up to 400mm²
- Can use 12 ton belts Alcoa, Burndy, T&B, Klauke, Cembreand Blackburn.
- Belt sold separately (CU sizes 16/25/35/50/70/95/120/150/185/240/300/400).
180° rotating head for convenient operation. The body and handle are completely insulated. Pressure relief valve for overload protection. Automatic low/high pressure switching with fast/slow operating motion. Two-stage hydraulic system reduces the number of hand pumps required.

HD-25X / Kudos
- Length: 354 mm
- Weight: 0.78 kg
- Capacity: from 6 to 25 mm2

YQK-70 / Juli
- Weight: 1.8 kg
- Bending force: 45kN
- Bending range: Cu 4-70mm2
- Bending type: hexagonal bending
- Length: 310mm
- Belt size: 4,6,8,10,16,25,35,50,70mm2
Professional tool for bending copper and aluminum pins of many different types, bending dies come in a variety of sizes from 4mm2 to 70mm2 to suit different size needs.

HK12042 / Klauke
Used to press all types of cosse heads or joints.
– The operation of creating hydraulic pressure of the pliers is done manually through the lever, with a light operation suitable for Vietnamese people.
– Automatically release the pressure valve when maximum pressure has been reached, returning the moving part of the pliers to its original position.
– There is a pressure release valve when necessary to return the moving part of the pliers to its original position.
– C-shaped pliers mouth with large mouth width
– The pliers head can rotate 3600 around the axis
– Can be used with many sets of belts with cross-sections from 16mm2 to 400mm2

EK 120 UNV Battery-powered hydraulic cutting and pressing pliers
- Tool used for pressing, cutting and punching.Easy to use when needing to operate different working functions.
- Use rechargeable batteries from  BOSCH or MAKITA. All operating data can be easily read via the versatile and rotatable flip-top Bluetooth. Simple and safe: One-button operation to control all functions of the pliers. LED lights from the pliers illuminate the work area. Simple and safe: automatically shuts off after completing the operation.

EK 120U-CFM / KLAUKE - Germany
- Battery-powered hydraulic cutting and pressing pliers
- Tools used for pressing, cutting and punching holes. Easy to use when needing to operate various working functions.
- Use rechargeable batteries from  BOSCH or MAKITA. All operation data can be easily read via Bluetooth. Versatile and rotatable flip-head style. Simple and safe: One-button operation to control all functions of the pliers. LED lights from the pliers illuminate the work area. Simple and safe: automatically shuts off after completing the operation.

EB-400 / Juli
- Weight: 6.4kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending range: 16-400mm2
- Bending cycle: 6s-18s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour

EK60CFM compression pliers
- High quality battery-powered hydraulic press.
- Suitable for pressing conductor terminals, pressing cable connections within the cross section range of 6-300 mm².
- Manufacturer: Klauke
- Germany Products have CO, CQ.

EKM6022 6T compression pliers
- High quality battery operated hydraulic press
- Suitable for pressing conductor terminals, pressing cable connections within the cross section range of 6-300mm².
- Manufacturer: Klauke
- Germany Products have CO, CQ.

EK135 15T compression pliers
Terminal crimping pliers, battery cable connector crimping pliers
Use wire pressing to: Cu 630mm2, Al 630mm2
Many superior features compared to pliers from other advanced countries.
Manufacturer: Klauke - Germany
Products have CO, CQ.

EK13042-CFM/KlauKe
- 13 ton hydraulic press pliers operated by rechargeable battery, Control pressure by button.
- C-shaped pliers mouth with large mouth size up to 42mm.
– Use cose clamps with sizes from 10-400mm ² and WR clamps.
- Can use steel core cable cutting belt.
– Quickly and easily remove and install the belt into the mouth of the pliers
– Automatic valve release when pressure is completed monitored by pressure sensor.
– There is a pressure release valve to return the moving part of the pliers mouth to its original position.
– The pliers head can rotate 360° around the axis of the pliers body.
– Integrated LED lights illuminate the work area
– There is an indicator light when the pressure does not meet the requirements and when the battery is low.
– Using 18V Li-ion battery allows long usage time.
– IPS smart control technology
– Main accessories included with the device: carrying case, 1 battery and 220kV charger included.
(additional computer connection software can be used to analyze the pressure for each press and the number of presses for maintenance work  if equipped).

ED-400 / Juli
- Weight: 6.4kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-18s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour

BZ-400 / Juli
- Weight: 7.3kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-8s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour
- 360 degree rotating bending head for easy operation. Has LED lights and LCD screen (displays bending time, amount of electricity, error message)

HD-OD3 / Kudos
- Length: 652 mm
- Weight: 3.20 kg
- Pressing force: 4.5 tons
- Pressing ability: Copper conductor, aluminum, ACSR, copper solder, aluminum solder, steel, 6201, 5005, compressed and compact conductor.
- Fiberglass handle and lightweight high-strength aluminum alloy casting.
- Use W type mold

HYCP-4013 / Kudos
- Length: 590 (L) mm
- Weight: 7.3 kg
- Max. Pressure: 700 bar
- Oil amount: 147 cc
- Max capacity: 12.7 tons / 125 kN
- Plier mouth width: 40 mm
- Diameter of pressing wire: up to 400mm²
- Can use 12-ton belts of Alcoa, Burndy, T&B, Klauke, Cembreand Blackburn types.
- Mold sold separately includes hexagonal belt sizes CU 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400.
- 180° rotating head for convenient operation. Fiberglass handle is durable and lightweight. Externally mounted relief valve, Pressure relief valve for overload protection. Automatic low/high pressure switching with fast/slow operating motion. Two-stage hydraulic system reduces the number of hand pumps required.

HYCP-185 / Kudos
- Length: 373mm
- Weight: 2.1kg
- Pressure: 550 bar
- Capacity: 5.85 tons / 52.0 kN
- Light weight, compact and slim design. Single-acting cylinder with return spring. Accept BEKU mold type.
- Yoke and pin type head for easy mold change and removal of connectors. Integrated bypass relief valve.

UB-412 / Kudos (Taiwan)
- Material: Steel head, fiberglass arm and handle.
- Pressure: 700 bar, ~11.4 tons / 112kN
- Hydraulic pressure creation of pliers through lever arm.
- There is a pressure release valve when necessary to return the piston of the pliers to its original position.
- The pliers head can rotate 180°
- C-shaped pliers mouth according to international standards has a large pliers mouth width of 40mm, fits all types of clamping belts from other brands.
- Weight: 6.7kg
- Length: 635m
- Use the base to press all types of cosse heads or joints
- Stored in a plastic box, with CO, CQ, manufacturer's warranty and accompanying documents
- Standard: EN

Y-35 (OKT-410) / Boryung (Korea)
- Material: Steel head, fiberglass arm and handle.
- Pressure: 1000PSI, ~12 tons
- Hydraulic pressure creation of pliers through lever arm.
- There is a pressure release valve when necessary to return the piston of the pliers to its original position.
- The pliers head can rotate 180°
- C-shaped pliers mouth according to international standards has a large mouth width, fits all types of clamping belts from other brands.
- Weight: 6.2kg
- Use the base to press all kinds of connectors or joints for copper, aluminum and ACSR wires
- Set includes 11 hexagonal clamps sized: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm²
- Stored in a plastic box, with CO, CQ, manufacturer's warranty and accompanying documents
- Standard: KOSHA (Korea)
Warranty 12 months