ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

KI 152 / Trung Quốc
- Chống các tia có hại khi nhìn lò luyện kim. 
- Được thiết kế để dễ dàng gắn trên lưỡi trai của mũ bảo hộ lao động. 
- Mắt kính xanh Coban thang số lọc No.6.

FCA8 / Blue Eagle - Taiwan
- Chất liệu : polycarbonate
- Kích thước : 20 cm x 48 cm ( 8" x 19")
- Độ dày : 1.5mm
- Giá trị bảo vệ hồ quang là 11 Cal/cm²
- Bộ lọc tia UV theo tỷ lệ : 2-1.7
- Tiêu chuẩn : EN166, ANSI Z87.1, CSA Z94.3, NFPA 70E, ASTM 2178, GS -ET 29

WG 209 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- White and smoky 2-layer glasses, 5 filter scale
- Single lens glasses, size 2" x 4- 1/4'
- Used for welding work, protecting against infrared rays and splashes from all sides

WG205 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- 2-layer white and smoke-colored glasses, filter scale 5, Ø 50mm lenses
- Used for aviation work, protecting against infrared rays and splashes from all sides

WH-754 / Longdar (Taiwan)*
- Material: ABS plastic, resistant to mechanical impact and sparks
- Meets EN 166, ANSI Z87.1 standards

WH-701 / Longdar (Taiwan)
- Material: ABS plastic
- Headgear type adjusts the knob board
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets EN 166, ANSI Z87.1 standards

WH-731 / Longdar (Taiwan)
- Material: ABS plastic
- Glass window 50 x 107 mm
- Includes 1 glass and 1 number 11 welding glass
- Meets EN 166, ANSI Z87.1 standards

WH-770 / Longdar (Taiwan)
- Material: ABS plastic
- Hat mounting type, fits all Taiwanese hats
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets EN 166, ANSI Z87.1 standards

HN.90/Vietnam
- Material: Heavy-duty HDPE plastic hat, PP mask.
- Weight: 640g+-10g
- Welding mask helmet has a 6-point shock-absorbing helmet with size adjustment lock using a knob.
- Used in environments that are dangerous to the head such as constructions, factories... suitable for workers, mechanics, welders, electricians...

Electric welding mask 3350 / VIKING-USA
- 4C Lens Technology, 1/1/1/1 Optical Clarity and Extra Large Viewing Area of ​​12.5 Square Inches
- Innovative X6 headgear helps distribute weight, reduce pressure and optimize balance

SZ-MST S2/China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
- View window size: 92x42mm
- Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (left side of mask): When placed in the off position, the darkness is 4 (corresponding to the case of eye protection when welding), rotate clockwise to get darkness 9,10,11, 12,13 depending on the electric current intensity when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Delay time: adjustable from 0.2 to 0.8 seconds (turn the DELAY knob from min to max)
- Use lithium batteries and solar batteries
- Light sensitivity: Adjustable from low to high (rotate knob from LO to HI)
- Green
- The product meets European EN standards

SZ-MST S1/ China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
+ Visible area size: 100x50mm
+ Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (right side of mask): Rotate clockwise to get darkness 9,10,11,12,13 depending on the intensity of the electric current when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- Delay time: 0.6 seconds
- Power supply: 2 small batteries and solar battery
- On and off mode: Open by pressing button (ON) - Turn off automatically
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- The product meets EN379:2003, EN 169:2002, EN 175:1997, ANSI Z87.1.2010 standards

Model: WH4000
- Mask material: PP plastic
- Brightness: DIN3; Darkness: DIN11
- Sensitivity: 1/10,000s at normal temperature
- Delay time: 0.5s
- Sensor: 02 pieces
- Power supply: Rechargeable battery and solar energy
- Dustproof, waterproof; UV & IR protection: Up to 16
- Overall size: 110 x 90 x 8mm (4-1/3” x 3-5/9” x 1/3”)
- Field of view: 98 x 35mm (3-6/7” x 1-1/3”)
- Weight: 430g
- Application: Arc welding, MIG, TIG