FT6380-50 / Hioki - Japan
- Ground resistance range: 0.20 Ω to 1600 Ω, 10 ranges
- AC current range: 20.00 mA to 60.0 A 5 ranges
- Current measurement: 100 A AC continuous, 200 A AC for 2 minutes or less
- Maximum rated ground voltage: 600 VAC
- Maximum measurable wire diameter: φ 32 mm (1.26 in)

FT6031-50 / Hioki - Japan
- Measuring system: 2-pole method/ 3-pole method (switchable)
- Accuracy:
±1.5% rdg ±8 dgt
±1.5% rdg ±4 dgt
±1.5% rdg ±4 dgt
- Earth voltage: Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60 Hz)
±1.3% rdg ±4 dgt (DC)
- Allowable ground potential: 25.0 V rms (DC or sine wave)

IR3455 / Hioki - Japan
-  Test voltage: 250 V to 5.00 kV DC
- Voltage measurement:
0.00 MΩ to 500 GΩ (250 V)
0.00 MΩ to 1.00 TΩ (500 V)
0.00 MΩ to 2.00 TΩ (1 kV)
0.00 MΩ to 5.00 TΩ (2.5 kV)
0.00 MΩ to 10.0 TΩ (5 kV)
- Current measurement: 1 mA
- Resistance range: 10 MΩ to 10 TΩ, 7 scales
- Leakage measurement: 1.00 nA to 1.20 mA, 6 scales
- Voltage measurement: ±50 V to ±1.00 kV DC, 50 V to 750 V AC

IR4053-10 / Hioki - Japan
- Output measurement voltage: 50/125/250/500/1000 VDC. In which the 500/1000 VDC ranges can be used for solar power systems.
- Maximum resistance measurement value: 100/250/500/2000/4000 MΩ
- Lower limit resistance value: 0.05/0.125/0.25/0.5/1 MΩ
- Measure DC voltage: 4.2V to 1000V, 4 scales
- Measure AC voltage: 420V / 600V, 2 scales

IR4056-21 / Hioki - Japan
- Output measurement voltage: 50/125/250/500/1000 VDC
- Maximum resistance measurement value: 100/250/500/2000/4000 MΩ
- Lower limit resistance value: 0.05/0.125/0.25/0.5/1 MΩ
- Overload protection: AC 600V (10s) for scales < 1000 VDC and AC 1200V (10s) for scales 1000 VDC
- DC voltage measurement feature: 4.2V to 600V, 4 scales
- AC 50/60 Hz voltage measurement feature: 420V / 600V, 2 scales
- Ground wire continuity test feature: 10 Ω to 1000 Ω, 3 scales

PD3129 / Hioki - Japan
- Voltage range: 3-phase 70 to 600V AC
- Clamp head diameter: 2.4mm to 17mm
- Positive phase detection: 4 LEDs light up clockwise and the speaker beeps intermittently
- Negative phase detection: 4 LEDs light up counterclockwise and the speaker sounds continuously

PD3129-10 / Hioki - Japan
- Voltage range: 3-phase 70 to 1000V AC
- Clamp head diameter: 7mm to 40mm
- Positive phase detection: 4 LEDs light up clockwise and the speaker beeps intermittently
- Negative phase detection: 4 LEDs light up counter-clockwise and the speaker sounds continuously

FT3701-20 / Hioki - Japan
- Non-contact remote temperature measurement:  -60.0 to 760.0°C; Resolution: 0.1°C
- Response time: 1 second
- Measurement wavelength: 8 to 14 μm
- Measuring area diameter: φ100 mm at a distance of 3000 mm

FT3424 / Hioki - Japan
Measuring range:
20 lx: 0.00 lx to 20.00 lx /1 count step
200 lx: 0.0 lx to 200.0 lx
2000 lx: 0 lx to 2000 lx
20000 lx: 0(0) lx to 2000(0) lx /10 count step
200000 lx: 0(00) lx〜2000(00) lx /100 count step
- Linearity: ±2% rdg.
- Output accuracy: ±1% rdg. ±5 mV
- Dimensions: 78 mm W × 170 mm H × 39 mm D
- Weight: 310 g

FT3432 / Hioki - Japan
- Measurement time: 1/5/10 minutes, or 1 hour
- Measuring range:
+ [Wide Range] A compensation: 30 dB to 137 dB, C compensation: 36 dB to 137 dB
+ [Peak range] A compensation: 65 dB to 137 dB, C compensation: 65 dB to 137 dB
- Frequency range: 20 Hz to 8000 Hz

8031F / Kyoritsu - Nhật Bản

- Điện áp hoạt động: 110 - 600V AC
- Cầu chì: 0.5A/600V (F)
- Thời hạn liên tục: >500V : Trong 5 Phút
- Tần số đáp ứng: 50Hz/60Hz
- Tiêu chuẩn áp dụng: IEC 61010-1 CAT III 600V Pollution Degree 2
- Điện áp chịu được: 5550V AC Trong 1 phút
- Kích thước: 106(L) × 75(W) × 40(D)mm
- Trọng lượng: 350g
- Dây: 1.5m
- Phụ kiện: Hộp đựng và hướng dẫn sử dụng

8125 / Kyoritsu - Japan
- Diameter of pliers: Ø40mm
- Current measuring range: AC 500A
- Output voltage: AC 500mV/500A
- Phase shift: ±1.0º
- Output impedance: 2Ω
- Optional accessories: Jack 7146; Extension cord 7185

8128 / Kyoritsu - Japan
- Diameter of pliers: Ø24mm
- Current measuring range: AC 5A (Max.50A)
- Output voltage: AC 50mV/5A
- Phase shift: ±2.0º (45 – 65Hz)
- Output impedance: About 20Ω
- Optional accessories: Jack 7146; Extension cord 7185

2060BT / Kyoritsu - Japan
- Wiring type: 1 Phase 2 Wire, 1 Phase 3 Wire, 3 Phase 3 wire, 3 Phase 4 Wire
- Measurements and parameters: Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor Phase angle, Harmonics, Phase sequence
- AC voltage: 1000 V
- Peak factor: 3 or less at current range 40A/400A
3 or less 1500A at 1000A current range
- Frequency: 40.0 – 999.9Hz
- Operating capacity: 40.00/400.0/1000kW
- Reactive power: 40.00/400.0/1000kVA
- Apparent capacity: 40.00/400.0/1000kVar
- Power factor (cosØ):  -1.000 – 0.000 – +1.000.
- Phase angle (For 1 Phase 2 Wire connection):  -180.0 – 0.0 – +179.9.
- Total harmonics THD-R/THD-F:  0.0% – 100.0%
- Phase order: ACV 80 – 1100V
- Clamp diameter: φ75 mm

2062BT / Kyoritsu - Japan
- Wiring type: 1 Phase 2 Wire, 1 Phase 3 Wire, 3 Phase 3 wire, 3 Phase 4 Wire
- Measurements and parameters: Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor, Phase angle, Harmonics, Phase order
- AC voltage: 1000 V
- Peak factor: 1.7 or lower
- AC current: 40/400/1000 A (3 automatic measurement ranges)
- Peak factor: 3 or less at current range 40A/400A
3 or less 1500A at 1000A current range
- Frequency: 40.0 – 999.9Hz
- Operating capacity: 40.00/400.0/1000kW
- Reactive power: 40.00/400.0/1000kVA
- Apparent capacity: 40.00/400.0/1000kVar
- Power factor (cosØ):  -1.000 – 0.000 – +1.000.
- Phase angle (For 1 Phase 2 Wire connection):  -180.0 – 0.0 – +179.9.
- Total harmonics THD-R/THD-F:  0.0% – 100.0%
- Phase order: ACV 80 – 1100V (45 – 65Hz)
- Clamp diameter: φ55mm max

4200 / Kyoritsu - Japan
- Check earth resistance:
+ Measuring range: 20Ω/200Ω/1200Ω
+ Resolution: 0.01Ω/0.1Ω/1Ω/10Ω
- Check AC current:
+ Measuring range: 100mA/1A/10A/30A
+ Display range: 0.1mA/1mA/0.01A/0.1A

4202 / Kyoritsu - Japan
- Check earth resistance: Measuring range: 0~20Ω/ 0~200Ω/ 0~1500Ω
- Check AC current: Measuring range: 100/1000mA/10A/30A

2432 / Kyoritsu - Japan
- AC current A: 4/40mA/100A
- Maximum loop voltage: 600V AC/DC ; 300V AC/DC
- Frequency: 20Hz~1kHz
- Diameter of pliers: Ø40mm

2433 / Kyoritsu - Japan
- Current AC A: AC A:
40/400mA/400A (50/60Hz)
(WIDE) 40/400mA/400A
- Frequency: 20Hz~1kHz (40Hz~1kHz:400A)
- Diameter of pliers: Ø40mm
- Dimensions: 185(L) × 81(W) × 32(D) mm