276SHD / SEW - Taiwan
- Working voltage
+ High voltage: 3kV ~ 24kV AC
+ Low voltage: 80 ~ 600V AC
- Frequency: 50/60Hz
- Retracted length: 255±30mm
- Length when pulled out: 870±30mm
- Warning Red LED and Buzzer (50dB)
- Detect voltage: 80V-24kV.
- Working temperature: -10˚ C ~ +50˚C
- Weight: 180g
- Power: LR44 battery (1.5V)
- Standard: EN61010-1 EN50081-1 EN55082-1En55022 EN61000-4-2 EN61000-4-3

276HD / SEW - Taiwan
- Working voltage
+ High voltage: 3kV ~ 24kV AC
+ Low voltage: 80 ~ 600V AC
- Frequency: 50/60Hz
- Retracted length: 354+30mm
- Length when pulled out: 1010±30mm
- Warning LED flashes and Buzzer sounds (50dB)
- Detect voltage: 80V-24kV.
- Working temperature: -10˚ C ~ +50˚C
- Weight: 180g
- Power: LR44 battery (1.5V)
- Standard: EN61010-1 EN50081-1 EN55082-1En55022 EN61000-4-2 EN61000-4-3

300HP (275-KV02) / SEW - Taiwan
- Test voltage range: OFF--TEST--240V--3.3kV--6.6kV--11kV--22kV--33kV--66kV--132kV--275kV
- The maximum detection range can be 500kV
- LED warning and audible siren
- At 240VAC detection distance: 5 ~ 10cm
- Operating temperature: -10°C~50°C
- Protection level: IP66.
- 3 LEDs in a circle for easier viewing in any direction (360° LED indicator).
- Power source: 3 x 1.5V "C"
- Weight: 590g
- Dimensions: 265x117mm

300HP (275-KV01) / SEW - Taiwan
- Test voltage range: OFF--TEST--240V--2kV--6kV--11kV--22kV--33kV--132kV--275kV
- The maximum detection range can be 500kV
- LED warning and audible siren
- At 240VAC detection distance: 5 ~ 10cm
- Operating temperature: -10°C~50°C
- Protection level: IP66.
- 3 LEDs in a circle for easier viewing in any direction (360° LED indicator).
- Power source: 3 x 1.5V "C"
- Weight: 590g
- Dimensions: 265x117mm

275HP-500KV / SEW - Taiwan
- Test voltage range: 240V, 3.3kV, 11kV, 22kV, 33kV, 66kV, 110kV, 220kV, 330kV, 500kV
- LED and sound warnings
- Operating temperature: -10ºC~50ºC
- At 240VAC detection distance: 5~10cm
- Power source: 3 x 1.5V "C"
- Weight: 600g

275HP / SEW - Taiwan
- Test voltage range: 240VAC, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV
- LED display and audible buzzer
- Operating temperature: -15°C~55°C
- At 240VAC detection distance: 5 ~ 10cm
- Power source: 3 x 1.5V "C"
- Weight: Approx. 550g (including battery)
- Suitable for all types of poles. For both indoor and outdoor use

LVD-18 / SEW - Taiwan
- Direct contact voltage detection: 50V~600Vac
- Non-contact voltage detection: 50V~600Vac
- Frequency: 50~500Hz
- Measurement type: CAT III 600V
- LED and audio alerts when voltage is detected
- Humidity: < 80% R.H.
- Altitude: max 2000m
- Power: 1.5V (AAA) × 2
- Dimensions: 165 (L) x 27 (W) x 22 (D) mm
- Weight including battery: 46g

277HP / SEW - Taiwan
- High voltage tester with two optional measuring ranges: Low: 50V~1.5kV; High: 1.5kV~132kV
- Electric used:
+ Off state: <5uA
+ Low voltage detection mode: <40mA
+ High voltage detection mode: <40mA
- Mode switching button: HIGH/OFF/LOW
- Operating temperature: 0ºC~40ºC
- Dimensions: 318 x 75 x 71 mm
- Weight: 227g
- Self-test function: press the "Test" button to check that the device is working properly before using it to check high voltage.
- Protection standard: EN61326-1; EN61000-4-2; EN61000-4-3

273HP / SEW - Taiwan
- High voltage tester with two optional measuring ranges: Low: 50V~1.5kV; High: 1.5kV~132kV
- Electric used:
+ Off state: 0uA
+ Low voltage detection mode: <20mA
+ High voltage detection mode: <20mA
- Mode switching button: HIGH/OFF/LOW
- There is a glowing LED light and an alarm sound when voltage is detected
- Operating temperature: 0ºC~50ºC
- Dimensions: 245 x 80 x 37 mm
- Weight: 175g
- Power supply: 9V (6LF22) x 1 Alkaline battery
- Must use a working pole when testing high voltage 1.5kV ~ 132kV
- Safety standards: EN 61326-1, EN 61000-4-2, EN 61000-4-3

3280-10F / HIOKI - Japan
- AC current: 0-1000 A, 3 scales. Can measure up to 4200A when used with the Hioki CT6280 extension ring
- DC voltage: 0-600 V, 5 scales
- AC voltage: 0-600 V, 4 scales
- Resistance: 0-42.00 MΩ, 6 scales
- Continuous circuit: buzzer at threshold ≤ (50 Ω ± 40 Ω)
- Wire clamp diameter: φ 33 mm
- Dimensions: (WxHxD) 57x175x16 mm
- Weight: 100g

GOL 32 D / BOSCH
- Accuracy: ± 1 mm at 30 m
- Measuring unit: 360 degrees
- Magnification: 32x
- Operating range: 120 m
- Protection rating: IP 54
- Tripod thread: 5/8"
- Operating temperature: -10 – 50 °C
- Storage temperature: -20 – 70 °C
- Weight, approximately: 1.5 kg
- Operating range, value: 120 m

Here is the translation:

---

**GOL 26 D / BOSCH**

- Accuracy: ± 1.6 mm at 30 m
- Measuring unit: 360 degrees
- Magnification: 26x
- Operating range: 100 m
- Protection rating: IP 54
- Tripod thread: 5/8"
- Operating temperature: -10 – 50 °C
- Weight, approximately: 1.5 kg

PC6011SD / LUTRON - Taiwan
- Analyze power quality, 1-phase and 3-phase power.
- True RMS vol and current measurement.
- Measure capacity: KW, MW, GW.
- Measure AC.V: 600V, AC.A: 0 -2000A
- Display measurement chart
- Measure temperature from -100 – 1300

CHM600E / Suparule -Ireland
- Cable range: 23m/75ft; Measure 6 wires
- Operating temperature: -10°C - 40°C
- Size: 205x100x70 mn
- Weight: 0.5 kg
- Handheld cable height measuring device. To measure cable height distance, deflection and overhead clearance.
- Simple operation with 3 buttons ensures fast and effective measurements
- Auto power off function helps save battery when inactive after three minutes
- Measurement applications: Telephone lines, Distribution lines, Transmission lines, Cable TV (installers and contractors), Street lights, Sag (lowest point above ground), Dark separation six cable multi.

Displays the mechanical number
Wheel Φ320mm
Diameter 12.5"
Folding handle

Displays the mechanical number
Wheel Φ150mm
Diameter 6"
Folding handle

Displays the mechanical number
Wheel Φ150mm
Diameter 6"
Folding handle

275HP-275kV02 / SEW - Taiwan
- Test voltage range: 240V--3.3kV--6.6kV--11kV--22kV--33kV--66kV--132kV--275kV
- LED display and audible buzzer
- Operating temperature: -15°C~55°C
- At 240VAC detection distance: 5 ~ 10cm
- Power source: 3 x 1.5V "C"
- Weight: Approx. 550g (including battery)
- Suitable for all types of poles. For both indoor and outdoor use

PD800IW is a wireless phase isotope tester designed for convenient phase angle testing, easy to use because it does not require connecting cables between probes. The device includes a probe and a reference probe that are connected via wifi and will operate reliably at distances of up to 100 feet (30 meters). The device can use voltage levels from 120V to 800kV
Specifications
- Type: PD800W.
- Place of manufacture: Bierer Associates Inc (USA).
- Use indoors and outdoors.
- Operating temperature: -100C to +500C.
- 9V rechargeable battery with removable charger 220V/50Hz.
- LED screen displays phase difference angle.

- Indirect type electrical test head, does not contact electrically charged objects
- 8 test voltage ranges: Off/ 240V/ 4.2kV, 15kV, 25kV, 35kV, 69kV, 115kV, 230kV
- Signaling with LED lights and sound
- Uses 3 1.5V batteries
- Compatible with most link bars. Can be used indoors and outdoors
- Maximum detection range can be up to 230kV