JTDX-110KV / Jiatai
- 3 floor bars 2 meters long, pipe diameter 3cm, super light Epoxy plastic, good insulation and heat resistance.
- Cable set includes 3 2 meter long cables connected to 1 12 meter cable. The ground wire is made from copper wire with a cross section of 35 mm²
- 1 grounding nail with diameter 1.6 cm, width 13.5 cm, length 81 cm
- 1 Hook is light cast aluminum alloy compression
Used for grounding before performing work on power lines, ensuring safety for workers.

BMTS4/6 / Sofamel - Spain
- Length when collapsed: 1.7 meters
- Maximum extended length: 5.97 meters
- Use indoors and outdoors.
- Weight: 3.40 Kg
- Made of reinforced fiberglass, the pole's head is toothed
- The telescoping pole has a special stepless adjustment mechanism with durable locking latch, light and very fast operation compared to other types of poles.

BMTS5/9 / Sofamel - Spain
- Length when collapsed: 2 meters
- Maximum extension length: 8.75 meters (5 sections)
- Use indoors and outdoors.
- Weight: 5.2 Kg
- Made of reinforced fiberglass, the pole's head is toothed
- The telescoping pole has a special stepless adjustment mechanism with durable locking latch, light and very fast operation compared to other types of poles.

SP-321 / Sofamel - Spain
- Material: rubber
- Size: size 19
- Length: 1m / 1.5m
- Used as temporary insulation for bare conductors at low voltages.

SP-39 / Sofamel - Spain
- Wooden clamp 120 mm long used to fix the vinyl cloth on the electrical wire

Vinyl SP-35 / Sofamel - Spain
- Material: Made of vinyl, used to insulate a part in low voltage facilities
- 0.3 mm thick
- Size: 50 x1.4m
- According to IEC 61112 standard.

BMAI-4V/220U / Sofamel - Spain
- Total length: 4 meters (Including 2 sections, each section is 2m)
- Working voltage: 220KV
- Use indoors and outdoors
- Weight: 4.06 kg

SM-02K / Sofamel - Spain
Pole hook SM-02K for A444U

ELBT / Sofamel - Spain
- Grounding kit includes:
+ 4 clamps connected to 0.7m long pipe with insulated rubber handle.
+ Connector for use with glass wires with a diameter of 3-18 mm
+ 3 16mm2 copper sections with PVC insulation, each 0.6m long.
+ 1 carrying bag
- According to IEC 61230 standard.

Ty leo trụ/VN
- Được chế tạo bằng thép vật liệu chịu lực
- Chiều dài: 250mm ± 5%
- Thân ty tròn: F 16mm ± 0,4mm
- Đầu ty có gờ chặn: F22mm dày 4mm
- Mạ lớp kẽm bảo vệ
- Chịu lực uốn: 180kg/5 phút
- Chịu lực uốn làm việc lâu dài: 135kg
- Trên thân có ký hiệu riêng cho từng sản phẩm

Ty leo trụ/VN
- Được chế tạo bằng thép vật liệu chịu lực
- Chiều dài: 230mm ± 5%
- Thân ty tròn: F 16mm ± 0,4mm
- Đầu ty có gờ chặn: F22mm dày 4mm
- Mạ lớp kẽm bảo vệ
- Chịu lực uốn: 180kg/5 phút
- Chịu lực uốn làm việc lâu dài: 135kg
- Trên thân có ký hiệu riêng cho từng sản phẩm

Ty leo trụ/VN
- Được chế tạo bằng thép vật liệu chịu lực
- Chiều dài: 230mm ± 5%
- Thân ty tròn: F 16mm ± 0,4mm
- Đầu ty có gờ chặn: F22mm dày 4mm
- Mạ lớp kẽm bảo vệ
- Chịu lực uốn: 180kg/5 phút
- Chịu lực uốn làm việc lâu dài: 135kg
- Trên thân có ký hiệu riêng cho từng sản phẩm