ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

FS 801 / Longdar (Taiwan)
- Material: polycarbonate
- High impact resistance, friction and abrasion resistance
- Elastic band tied around the head or hat

Proshield / Jogger (Belgium - China)
- Material: Made from high-performance Poly Ethylene (HPPE) fiber with good cut resistance.
- The entire palm and fingers are covered with PU layer, rough layer design, increasing anti-slip, anti-oil, anti-vibration ability and increasing grip when holding.
- Size: 8, 9, 10, 11
- Provides level 5 cut resistance in EN 388:2016 - EN 420:2016 standards
- Gloves are good for use in greasy, chemical and mild acid environments
- Suitable for use in mechanical industries, construction, automobiles, mining and other heavy industries.

Structure / Jogger (Belgium-China)*
- Material: Made from high-performance Poly Ethylene (HPPE) fiber with good cut resistance.
- Covered with oil-resistant rubber,
- Wrinkle latex coating provides grip, high friction, and good abrasion resistance
- Meets EN-388 (3243), EN 420 standards
- Used in jobs that require grease, chemicals and mild acids.
- Size: 7~11

Castong heat-resistant gloves*
- 34 cm long, 18 cm wide, designed to fit the hand.
- 300 degree Castong heat-resistant gloves are treated with anti-bacterial, mold-free, deodorized, and the inside is non-stick treated to create a comfortable feeling.
- Material combines aramid textile fiber and glass fiber, one side covered with fireproof aluminum.
- Features: high temperature resistant up to 300 degrees Celsius, fire resistant. The palm is heat resistant up to 400 degrees Celsius.
- Advantages: soft, easy to manipulate

MAG+ 460 A2B2E2K2P3 / Sorbent (Rusia)
- MAG-2 includes a large, durable, transparent glass panel that creates a wide field of view, a soft rubber part surrounding the glass and the facial skin interface consists of 2 layers, durable against the effects of temperature and chemicals. toxic
- Joint to attach the centrally placed filter tank to the inhalation valve - The structure of the outer cover and the inner cover creates an almost absolute tightness, only allowing breathing air to enter the body after passing through the filter. .
- MAG works well in environmental conditions with temperatures ranging from -40 ° to 40 ° C and relative humidity up to 98%
- Conforms to EN 136: 1998 + AC: 2003, Class 2 standards
- Filter combined with MAG full mask to create respiratory protection against organic and inorganic toxic vapors, acid vapors, and toxic ammonia gas in the air
(Can be used with European full face masks)

MAG / 320 / Sorbent (Russia)
* Products include: full mask and DOT pro 320 A2P3 toxic gas filter. The MAG full-face cover consists of a large, durable, transparent glass panel that creates a wide field of view. The soft rubber border surrounding the glass and the skin on the face consists of 2 layers, durable against the effects of temperature and humidity. toxic chemicals
- Coupling to attach the centrally located filter tank to the inhalation valve
- The structure of the outer and inner hood creates an almost absolute tightness, only allowing breathing air to enter the body after passing through the filter.
- MAG works well in environmental conditions with temperatures ranging from -40 ° to 40 ° C and relative humidity up to 98%
- Conforms to EN 136: 1998 + AC: 2003, Class 2 standards
- Synthetic toxic gas filter DOTpro 320 A2P3 Use with MAG full mask
- Used to protect respiratory organs when working in polluted environments from vapors and organic gases with boiling points above 65OС (such as benzol, benzene, xylene, toluene, kerosene, organic halogen compounds , Nitrogen, compounds of benzol and its analogues, aniline, ketones, tetraethyl lead, ...)

COV VINAH-E005
- Material: heavy-duty ABS plastic
- The helmet is lined with shock absorbing foam
- Adjust hat size with convenient screw buckle
- Quality standards: KCS (Korea)

HF-005/COV (Korea)
- Material: heavy-duty ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- Safe design, capable of withstanding high impact force.
- Color: White, Yellow, Orange, Blue
- Quality standards: KCS (Korea)

H-301091V/COV (Korea)
- Material: heavy-duty ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- Safe design, capable of withstanding high impact force.
- Color: White, Yellow
- Quality standards: KCS (Korea)

HF-001A/COV (Korea)
- Material: heavy-duty ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- There is a front visor that can be pushed up
- The nose of the cone has a clear plastic panel that does not obstruct vision when looking up
- Safe design, capable of withstanding high impact force.
- KCS standards (Korea)

COV-A001
- Material: Heavy-duty ABS, Foam-lined helmet cage
- Standard: ABE anti-shock, anti-pierce.
- Weight: 423g
- Color: White, Yellow
- Quality standards: KCS (Korea)

Vehicle extractor bag / Anbaco produces and distributes
- Material: high quality canvas
- Consists of 02 bags that are permanently linked together.
- Square bag, side length 370mm±5%.
- Fabric thickness from ≥1.5mm, guaranteed not to stretch when used
- The bottom and the link between the two bags are sewn in 2 sturdy layers.
- Two pockets with lids covering the entire bag, with padlocks
- Load-bearing bag weight: ≥ 25kg
- Equipping workers in the electricity, water supply, etc. industries to hold electricity and water meters and tools when repairing or using in similar jobs.
- Color: black, blue

448 / Anbaco - Vietnam
- Includes 4 alloy ground clamps
- The clamp head uses a wire clamp with a contact area of ​​50 ~ 300mm², the nose side can be made into a V shape up to 120⁰
- Ground wire made from 16mm² / 25mm² copper wire covered with 1mm PVC
- Set includes 1 piece of wire 1.5m long and 3 pieces 0.4m long connected by an insulated clamp (can be lengthened upon request)
- Used for grounding before performing work on 3-phase low voltage lines, Aptomat output at nuts and cables.
- Industrial design patent No. 21256 issued by the National Intellectual Property Office.

TD - 3351 / Anbaco
- Clamp head made of aluminum alloy
- The hot line clamp has a good spring and is tightened with a threaded ring. The contact surface between the clamp and the wire is large, good and even.
- The clamp head can clamp wires with a cross section of up to 240mm².
- There are 4 clamps for 01 set of ground wires.
- Grounding wire: Multi-strand soft copper wire with clear PVC coating; Uncoated wire cross section is 16mm²/25mm², PVC coating thickness is 1mm.
- There are 4 pieces of wire, each 2m long (or longer as required).
- At each end of the wire attached to the clamp head and the middle point connecting the wire segments, there must be a pressed coss. - At the pressed coss positions, there must be a flexible rubber cover on the outside to prevent the wire from fraying or breaking due to use. long time.
- Used to ground the medium voltage grid with voltage up to 35kV before performing work

Priscm Clean DMS-1001A / Kukje - Korea
- Material: high density ABS plastic
- Domed structure with impressive load-bearing ribs, creating high mechanical impact resistance and a smooth surface.
- The forehead is covered with soft and smooth foam to help absorb sweat.
- The back of the hat has a twist lock to adjust the size to suit the wearer's head.
- There is foam lining inside the hat to absorb impact force on the hat
- Shock absorber made of 3 durable Polyester strings with 6 damping points.
- The "Y" shaped hat strap is firmly fixed and has a buckle to help put it on or take it off easily.
- There is a rainwater drainage ditch around the rim of the labor helmet.
- Products meet standards: KOSHA, ISO 9001-2008
- Have C/O, C/Q and quality inspection certificate of imported goods of Quatest 3 (shock absorber, anti-pierce, anti-burn).

FH911/Bullard (USA)
- Weight: 490g
- Dimensions: Width - 11"(280mm); Length - 12 ¾" (325mm); Height - 6"(150mm)
- Hat body is made of heat-resistant and high impact-resistant material.
- Adjust helmet size with knob (FRS6RC) or button (FRS6PC)
- There are 3 available positions inside the hat body to connect to the heat-resistant spine cover Model R711
- The outside of the helmet body has a latch to attach fire goggles (Model ESS -XTO or ESS-WFB has a wide field of view)
- The product meets NFPA 1977:2011 standards

HF-008/ COV (Korea)
- Material: impact-resistant ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- Safe design, high impact resistance, and airy ventilation holes.
- Suitable for working environments with small hazards in assembly and production lines, warehouses, etc.
- Color: White, Yellow

HF-007/COV (Korea)
- Material: heavy-duty ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- Safe design, capable of withstanding high impact force.
- Color: White, Yellow
- Quality standards: KCS (Korea)