8031F / Kyoritsu - Japan
- Operating voltage: 110 - 600V AC
- Fuse: 0.5A/600V (F)
- Continuous duration: >500V: Within 5 Minutes
- Frequency response: 50Hz/60Hz
- Applicable standard: IEC 61010-1 CAT III 600V Pollution Degree 2
- Withstand voltage: 5550V AC For 1 minute
- Dimensions: 106(L) × 75(W) × 40(D)mm
- Weight: 350g
- Cord: 1.5m

2950CL / SEW - Taiwan
- ACA: + Measuring range: 40/400/1000A
+ Resolution: 0.01/0.1/1A
- ACV: + Measuring range: 4/40/400/750V
+ Resolution: 1mV/10mV/100mV/1V
- DCV: + Measuring range: 4/40/400/1000V
+ Resolution: 1mV/10mV/100mV/1V
- Resistance: + Measuring range: 400/4k/40k/400k/4M/40MΩ
+ Resolution: 0.1/1/10/100/1k/10kΩ
- Overload protection: ACV: 750Vrms
DCV: 1000V
Diode & ohm: 250Vrms
- Operating temperature/humidity: 0ºC ~ 40ºC/ 80%
- Battery: 100 hours of continuous operation
- Nipper mouth: 35mm Max
- Dimensions: 183(L) × 62(W) × 20(D)mm
- Weight: 123g
- Standard: EN 61010-1 CAT II 600V, CAT III 300V
EN 61010-2-32 ; EN 61326-1

1120ER / SEW - Taiwan
- Measuring range: 0-20Ω / 0-200Ω / 0-2000Ω
- Resolution: 0-20Ω : 0.01Ω / 0-200Ω : 0.1Ω / 0-2000Ω : 1Ω
- Ground voltage measurement: 0-200 Vac/±(1%rdg+2dgt)
- Dimensions: 175(L) × 85(W) × 75(D)mm
- Weight: 600g
- Power: 1.5V (AA) × 8
- Standard: ICE/EN 61010-1 CAT III 200V ; IEC 61557-1 ; IEC 61557-5 ; EN 61326-1

2803IN / SEW - Taiwan
- Test voltage (DCV): 0.5kV/1kV/2.5kV/5kV
- Measurement range: 0-25GΩ / 0-50GΩ / 0-125GΩ / 0-250GΩ
- Accuracy: 0-50GΩ : ±3% rdg; 50-250GΩ : ±5% rdg
- Dimensions: 170(L) × 120(W) × 95(D)mm
- Weight: 930g
- Power: 1.5V(AA) × 8
- Standard: EN 61010-1 ; EN 61326-1

287SVD / SEW - Taiwan
- Voltage detection distance
+ 6.6kV (3.8kV phase to ground): 40cm ± 20%
+ 11.4kV (6.6kV phase to ground): 55cm ± 20%
+ 19.7kV (11.4kV phase to ground): 80cm ± 20%
+ 22.8kV (13.2kV ​​phase to ground): 85cm ± 20%
- Water resistance: good, level IP65. Different types of AC voltage can be detected. Low power consumption. CE certification
- Warning start distance: 85cm for 22.8kV (phase – phase)
- Frequency: 50 / 60Hz. Siren: 70dB or higher at 1m distance
- Operating temperature: 0°C - 40°C. Humidity: 80%
- External dimensions: 61(L) x 62(W) x18.5(D) mm
- Weight: 70g (including battery)
- Battery: CR2032. Battery life: 50 hours of continuous use
Used to signal the user has entered a dangerous area with high voltage. Warning by sound signal (loud) and LED light. Used to wear on the wrist or on a hat.

286SVD / SEW - Taiwan
- Water resistance: good, level IP65. Different types of AC voltage can be detected. Low power consumption. CE certification
- Warning start distance: 80cm for 11.4kV (phase – phase)
- Frequency: 50 / 60Hz. Siren: 70dB or higher at 1m distance
- Operating temperature: 0°C - 40°C. Humidity: 80%
- External dimensions: 59(L) x 56(W) x18(D) mm
- Weight: 35g (including battery)
- Battery: CR2032. Battery life: 50 hours of continuous use
Used to signal the user has entered a dangerous area with high voltage. Warning by sound signal (loud) and LED light. Used to wear on the wrist or on a hat.

220HVD / SEW - Taiwan
- LED and audio indication when voltage is detected
- Voltage range: 6.6/132kV ; Threshold voltage: 2kV-3kV
- Frequency: 50-60Hz
- Dimensions: 300x100x100 mm
- Weight: 550g
- Standard: EN 61243-1
- Suitable for indoor and outdoor use (in all weather conditions). Compatible with all link bars. Automatically turns off after 3 minutes if no voltage is detected. Waterproof design, protection class IP65

3280-10F / HIOKI - Japan
- AC current: 0-1000 A, 3 scales. Can measure up to 4200A when used with the Hioki CT6280 extension ring
- DC voltage: 0-600 V, 5 scales
- AC voltage: 0-600 V, 4 scales
- Resistance: 0-42.00 MΩ, 6 scales
- Continuous circuit: buzzer at threshold ≤ (50 Ω ± 40 Ω)
- Wire clamp diameter: φ 33 mm
- Dimensions: (WxHxD) 57x175x16 mm
- Weight: 100g

PC6011SD / LUTRON - Taiwan
- Analyze power quality, 1-phase and 3-phase power.
- True RMS vol and current measurement.
- Measure capacity: KW, MW, GW.
- Measure AC.V: 600V, AC.A: 0 -2000A
- Display measurement chart
- Measure temperature from -100 – 1300

TIC-300PRO / AMBROBE
- Voltage detection:
+ 30 to 1500 VAC
+ 1500 to 122,000 VAC (w/ Hot Stick TIC 410A)
- Voltage detection range:
+ Low: 2.7" at 30 V to 7' 9" at 1500 V
+ High: 1' 2" at 1.5 kV to 22' 0" at 122.0 kV

PD800IW is a wireless phase isotope tester designed for convenient phase angle testing, easy to use because it does not require connecting cables between probes. The device includes a probe and a reference probe that are connected via wifi and will operate reliably at distances of up to 100 feet (30 meters). The device can use voltage levels from 120V to 800kV
Specifications
- Type: PD800W.
- Place of manufacture: Bierer Associates Inc (USA).
- Use indoors and outdoors.
- Operating temperature: -100C to +500C.
- 9V rechargeable battery with removable charger 220V/50Hz.
- LED screen displays phase difference angle.

- Indirect type electrical test head, does not contact electrically charged objects
- 8 test voltage ranges: Off/ 240V/ 4.2kV, 15kV, 25kV, 35kV, 69kV, 115kV, 230kV
- Signaling with LED lights and sound
- Uses 3 1.5V batteries
- Compatible with most link bars. Can be used indoors and outdoors
- Maximum detection range can be up to 230kV

3904CL / SEW - Taiwan
+ ACA: 400.0/2000A /±(1.5%rdg+4dgt)
+ ACV: 400.0mV,4,000/40.00/400.0/750V /±(1.0%rdg+3dgt)
+ DCA: 400.0/2000A /±(1.5%rdg+4dgt)
+ DCV: 00.0mV/4,000/40.00/400.0/1000V /±(0.75%rdg+2dgt)
+ Ω continuity test: 400.0Ω/4.000/40.00/400.0kΩ/4.000MΩ / ±(1.5%rdg+3dgt) 40.00MΩ ±(2.0%rdg+4dgt)
+ C: 2.000/20.00/200.0nF/20.00/200.0uF/2.000mF ±(3.0%rdg+5dgt)
+ Hz: 4.000/40.00/400.0kHz/4.000/40.00MHz/ ±(1.0%rdg+2dgt)
- Plier ring: 55mm Max.
- Dimensions: 265(L) × 100(W) × 42(D)mm
- Weight: 510g
- Power source: 9V(6F22) × 1

2055 / Kyoritsu - Japan
AC A : 0~600.0/1000A
DC A : 0~600.0/1000A
AC V : 6/60/600V
DC V: 600m/6/60/600V
Ω : 600/6k/60k/600k/6M/60MΩ
- Continuity check: Buzzer sounds 100Ω
- Frequency: 10/100/1k/10kHz
- Diameter of pliers: Ø40mm
- Effect frequency: 40 ~ 400Hz
- Power source: R03 (1.5V) (AAA) × 2
- Dimensions: 254(L) × 82(W) × 36(D)mm
- Weight: 310g
- Accessories: Measuring probe, Battery, Carrying case, User manual

Dây cáp đồng được bọc nhựa trong
- Tiết diện: 16mm2, 25mm2,...
- Được dùng trong hệ thống tiếp địa an toàn điện, hệ thống chống sét...
- Lõi cáp được tạo thành từ nhiều sợi đồng nhỏ, được rút cứng lại và bện thành các vòng tròn đồng tâm với nhau.

3288 / HIOKI - Japan
- Measure current DC100.0/ 1000 A
- Measure AC current: 100.0/ 1000 A
- Measure DC voltage: 419.9 mV to 600 V, 5 scales
- AC voltage measurement: 419.9 mV to 600 V, 4 scales
- Resistance measurement: 419.9 Ω to 41.99 MΩ, 6 scales
- Check continuity: resistance ≤ (50 Ω ±40 Ω)
- Wire clamp diameter: φ 35 mm

CM4375-50 / HIOKI - Japan
- DC current measurement range: 1000 A, (maximum display 999.9 A
- AC current range: 1000 A (Maximum display 999.9 A
- DC + AC current range: 1000 A
- DC capacity: 0.0 VA to 1000 kVA
- DC voltage range: 600.0 mV to 1000 V, 5 measuring ranges
- AC voltage range: 6,000 V to 1000 V, 5 measuring ranges
- DC + AC voltage range: 6,000 V to 1000 V, 5 measuring ranges
- Impedance range: 600.0 Ω to 6,000 MΩ, 5 measuring ranges
- Electrostatic capacity range: 1,000 μF to 1000 μF, 4 measuring ranges
- Frequency range: 9.999 Hz to 999.9 Hz, 3 measurement ranges
- Mount core diameter: φ34 mm (1.34 in)

3244-60 / HIOKI - Japan
- DC voltage measurement: 419.9 mV to 500 V; 5 measuring scales
- AC voltage measurement: 4.199 V to 500 V; 4 measuring scales
- Resistance measurement: 419.9 Ω to 41.99 MΩ; 6 measuring scales
- Check continuity: 50 Ω ± 40 Ω

CM4371-50 / HIOKI - Japan
- DC current measurement range: 20.00 A/600.0 A
- AC current range: 20.00 A/600.0 A
- DC/AC current range: 20.00A/ 600.0A
- DC voltage range: 600.0 mV to 1000 V, 5 scales
- AC voltage range: 6,000 V to 1000 V, 4 scales
- DC/AC voltage range: 6,000 V to 1000 V, 4 scales
- Resistance measurement: 600.0 Ω to 600.0 kΩ, 4 scales
- Capacitance measurement: 1,000 μF to 1000 μF, 4 scales
- Frequency range: 9,999 Hz to 999.9 Hz
- Check continuity:  [ON] 25Ω±10 Ω, [OFF] 245Ω±10 Ω
- Check diode: Open voltage ≤ DC2.0V, short circuit current: 200 μA.
- Temperature measurement:  -40.0 to 400.0 ˚C
- Clamp fork tight diameter: φ33 mm
- DC power measurement: 0.0 kVA to 600 kVA (up to 1200kA when used with Hioki P2000)